SEBU8190-02
The rotating shaft hand crush hazard label is on the
cover of the crankshaft vibration damper guard.
Engine Derate
Illustration 9
Typical example
The warning label for derating engine information is
supplied loose.
Additional Messages
Illustration 10
Typical example
The label will be installed on the engine oil cooler. A
special starting procedure may be required. Refer to
this Operation and Maintenance Manual, Before
Starting Engine for the correct procedure.
General Hazard Information
i07195884
Illustration 11
Attach a "Do Not Operate" warning tag or a similar
warning tag to the start switch or to the controls
g06249496
before the engine is serviced or before the engine is
repaired. Attach the warning tags to the engine and
to each operator control station. When appropriate,
disconnect the starting controls.
Do not allow unauthorized personnel on the engine,
or around the engine when the engine is being
serviced.
11
Safety Section
Additional Messages
g01241021
i08340363
g00104545