Hot Folder Printing - Epson ONYX RIP Manual

Epson Manual for RIP Printing (ONYX RIP)
Note:
If a Time appears on the bottom right under Print Now, printing automatically begins after the set time after the print
data is read. See the following procedure if you are disabling automatic printing.
(1) In Placement, click
(2) Clear Time Based Start in the General tab, and then click OK.

Hot Folder Printing

c
Important:
Do not do other operations with the RIP if you are doing hot folder printing. If you do RIP processing, etc., at the
same time, printing may be interrupted.
A
Correctly load the media into the printer.
See Operator's Guide (booklet/online manual) for the procedure for loading media.
B
Double click the RIP Queue icon.
C
Set so that printing starts automatically.
(1) Click
in Placement in the printer status on the right side of the Rip Queue screen.
(2) Select Time Based Start in the General tab and set Print after to 0 seconds.
(3) Click OK.
Print Operations
.
28