Epson OT-BZ20 User Manual

Introduction
This product is an optional external buzzer for Epson TM printers.
This manual provides directions to use this product safely and correctly and simple
instructions for installation. Read the manual carefully before using this product.
When you use a printer that can be attached to this product, see its Technical
Reference Guide for details of the printer settings.
Standards and Approvals
The following standards are applied only to the
printers that are so labeled. (EMC is tested using the
Epson power supplies.)
Europe: CE marking
North America: FCC/ICES-003 Class A
Oceania: AS/NZS CISPR22 Class A
WARNING
This is a Class A product. In a domestic environment
this product may cause radio interference in which
case the user may be required to take adequate
measures.
CE marking
The printer conforms to the following Directives and
Norms:
Directive 2004/108/EC
EN 55022 Class A
EN 55024

Safety Precautions

WARNING:
Shut down your equipment immediately
if it produces smoke, a strange odor, or
unusual noise. Continued use may lead
to fire. Immediately unplug the
equipment and contact your dealer or
a Seiko Epson service center for advice.
Never attempt to repair this product
yourself. Improper repair work can be
dangerous.
Never disassemble or modify this
product. Tampering with this product
may result in injury or fire.
OT-BZ20 User's Manual
IEC 61000-3-2
IEC 61000-3-3
Copyright © Seiko Epson Corporation 2010
FCC Compliance Statement for
American Users
This equipment has been tested and found to comply
with the limits for a Class A digital device, pursuant
to Part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful
interference when the equipment is operated in a
commercial environment.
This equipment generates, uses, and can radiate
radio frequency energy and, if not installed and used
in accordance with the instruction manual, may
cause harmful interference to radio communications.
Operation of this equipment in a residential area is
likely to cause harmful interference, in which case
the user will be required to correct the interference at
his own expense.
For Canadian Users
This Class A digital apparatus complies with
Canadian ICES-003.
À l'intention des utilisateurs
canadiens
Cet appareil numérique de classe A est conforme à
la norme canadienne NMB-003.
If water or other liquid spills into this
equipment, unplug the power cord of
the printer immediately, and then
contact your dealer or a Seiko Epson
service center for advice. Continued
usage may lead to fire.
CAUTION:
Do not use in locations subject to high
humidity or dust levels. Excessive
humidity and dust may cause
equipment damage or fire.
1
411919400
Printed in China