Advertisement
2.3.3 Function Interface
As shown below:
@
1. CH1 information, the selected channel will be highlighted.
HighZ indicates the matched impedance of output terminal (10 to 9990 adjustable or high
resistance; defaults to HighZ)
riii1l!!: sine wave currently (Different modes have different menu)
2. CH2 information, as same as Ch1
3. Waveform parameters list
The parameters of current waveform are listed, if one item of the list is displayed at white, users
can set its parameters through the menu operating keys, numeric keypad, direction keys and
multi-functional knob. If the under-painting of selected word is the same as current channel
(white in system setting), indicates that the word is in edit mode.
4. Waveform display area
Displays waveform of current setting channel which can be distinguish by highlighted information
label, and its parameters are displayed on the left side. The waveform display area will display
parameters list during system setting.
5. Soft key label
Identify the current function of soft keys.
The middle of current function label will be highlighted with corresponding color of current
channel, or goes with grey color and white font during system setting.
9
UNl-1':
©
Advertisement
