Advertisement
Note
You need the designated password when you move
the option key. Record the password as a reminder.
6
Press the SET function button (F5).
Installation begins.
When installation of the option key ends
successfully, the XDS-PD2000
automatically restarts.
After the XDS-PD2000 restarts, the installed
option key becomes valid.
10
Moving the Option Key
Moving the Option Key
You can move the option key from one
XDS-PD2000 to another.
First, perform the following to remove the option
key from the XDS-PD2000 on which the option
key is currently installed and move it to the SxS
memory card.
Next, perform the procedure described in
"Installing the Option Key" to install the option
key on a different XDS-PD2000.
Note
Be sure to move the option key to this SxS memory card.
The operation of the option key is not guaranteed if it has
been moved to an optional card.
1
Insert the SxS memory card into slot A
of the XDS-PD2000.
Note
The SxS memory card cannot be used in slot B.
2
Display the maintenance menu and
select maintenance menu item
M23:OPTION KEY under M2:
SERVICE SUPPORT. (See step 2 in
"Installing the Option Key.")
3
Select "REMOVE."
To cancel the removal
Press the EXIT function button (F6).
Advertisement
