Using The Caller List; Viewing The Caller List - Panasonic KX-TC1871ALB Operating Instructions Manual

Using the Caller List

Viewing the Caller List

To check who has called, follow the steps below.
Make sure the unit is in the standby mode.
With the handset
1 Lift the handset off the base
unit and press
enter the Caller List.
≥The display will show, for
example, the following:
2 new calls
1=Directory
4 3
≥You can go to the directory list
by pressing FWD/EDIT (fl)
(p. 54).
2 To search from the most
recent call, press
To search from the oldest
call, press
≥To scroll between callers,
press (›) or (‹).
*
JACK SMITH
0112233445
3:10P JUN.10
3 To exit the list, press
(FUNCTION/EXIT/CH)
≥The handset will return to
the standby mode.
*Caller's name and phone number are stored in the directory
(—Private name display).
≥Once new calls have been checked, "ˆ" will be added.
≥If "No items stored" is displayed in step 1, the Caller List is empty. After
5 seconds, the unit will return to the standby mode.
≥If more than one call is received from the same caller, the date and time of the
most recent call will be recorded. If the same caller calls again, the call entry
with "ˆ" will be deleted.
38
(›) (‹)
or to
(›)
.
(‹)
.
.
With the base unit
(CALLER\ID)
1 Press
the Caller List.
≥The display will show, for
example, the following:
2 new calls
<<=Old
2 To search from the most
recent call, press
To search from the oldest
(REPEAT/REW)
call, press
≥To scroll between callers,
press (SKIP/FF) or
(REPEAT/REW).
*
JACK SMITH
0112233445
3:10P JUN.10
3 To exit the list, press
(STOP/EXIT)
.
≥The base unit will return to
the standby mode.
to enter
>>=New
(SKIP/FF)
.
.