Programmable Functions - Panasonic KX-TC1871ALB Operating Instructions Manual

Programmable Functions

You can program the following function items using the handset near
the base unit. The display shows the programming instructions.
See the corresponding pages for function details.
Make sure the unit is in the standby mode.
(FUNCTION/EXIT/CH)
Press
<Function menu>*
1Save directory
Calling pager
Ringer volume
Program
<Function menu>*
1Save DIRECT#
Set recall time
Set line mode
Talk switching
TAD program
During programming
*To select a desired function item, press
arrow points to the item. Then press
≥If the handset displays "No link to base. Place on cradle and try
again." and an alarm tone sounds, move closer to the base unit and try again.
≥You can exit the programming mode any time by pressing (FUNCTION/EXIT/CH).
≥If you do not press any buttons for 60 seconds, the unit will return to the standby
mode.
18
.
To store an item in the directory (p. 50).
To dial the stored pager number (p. 73).
To select the ringer volume (p. 20).
FWD/EDIT (fl)
Press
To store a phone number in the DIRECT button
(p. 47).
To select the recall time (p. 64).
To select the line mode (p. 17).
To set the auto talk feature (p. 19).
To program answering system functions (p. 24).
(›)
FWD/EDIT (fl)
.
(‹)
or repeatedly until the
to go to the next step.