Hand Scanner Functions (For KX-PW21CL only)
Preparations
1
1. Remove the hand scanner from the main unit
and open the battery cover.
2. Install the battery (included).
3. Connect the hand scanner to the main unit.
Power Indicator
Power Indicator
Lights (Red)
Flashes (Red)
Does not light.
Memory Indicator
Does not light.
Lights (Green)
Flashes slowly
(Green)
Flashes (Green)
Battery cover
Red
Black
ス キ ャ ナ ー セ ッ テ イ チ ュ ウ
ヨ ミ ト リ マ イ ス ウ 0 マ イ
Memory Indicator
The battery power is full.
The battery power is low.
Replace the battery.
Replace the battery.
Memory is empty.
66% of memory is used.
99% of memory is used.
Memory is full.
Scanning documents
2
消去
画質
文字
写真
(Resolution)
読取幅
(Scanning Width)
1. Remove the hand scanner from the main unit.
2. Select the resolution. (文字:text, 写真:photo)
3. Select the scanning width.
4. Set the hand scanner on the document.
Left side of
the document
Scanner
position
スタート/ストップ
5. Press
– A beep is heard.
– The in use indicator light turns on (green).
6. Move the hand scanner slowly
over the document.
スタート/ストップ
7. Press
8. Connect the hand scanner to the main unit.
9
In Use Indicator
Memory Indicator
スタート/ストップ
(Start/Copy)
A4
B4
(start/stop).
(start/stop) to end the operation.