About The Controls On The Air Conditioner; Controls; Remote Control - Panasonic CW-XC183HU Installation And Operating Instructions Manual

About the Controls on the Air Conditioner

Controls

DISPLAY
2 6
4
Precaution: The Remote Control unit will not function properly if strong light strikes the sensor
window of the air conditioner or if there are obstacles between the Remote Control
unit and the air conditioner.
OPERATION BUTTON
• To turn the air conditioner ON, push the
button. To turn the air conditioner OFF, push
the button again.
• This button takes priority over any other
buttons.
• When you first turn it on, the air conditioner is
on the High cool mode and the temp. at
72°F(22°C)
OPERATION MODE SELECTION BUTTON
Every time you push this button, it will toggle
between COOL, FAN.
ROOM TEMPERATURE SETTING BUTTON
This button can automatically control the
temperature of the room. The temperature can
be set within a range of 60°F to 86°F by 1°F.
(16°C to 30°C by 1°C)
Select the lower number for lower temperature
of the room.
FAN SPEED SELECTION BUTTONS
Every time you push this button, it is set as
follows.
{High(F3) Low(F1)
ECONOMY
• If the switch is set to "On", the fan stops when
the compressor stops cooling. Approximately
every 3 minutes the fan will turn on and check
the room air to determine if cooling is needed.
3 7
Med(F2) High(F3)...}.

REMOTE CONTROL

1
8
6
2
1
5
ON/OFF TIMER BUTTON
You can set the time when the unit will turn on or turn
off automatically by pressing the timer button. If the
unit is operating, this button controls the time it will be
turned off. If the unit is off state, this button controls
the time it will start. Every time you push this button,
the remaining time will be set as follows.
- STOPPING OPERATION
• Every time you push this button, when the air
conditioner is operating, timer is set as follows.
(1Hour 2Hours 3Hours 4Hours 5Hours
6Hours 7Hours 8Hours 9Hours 10Hours
11Hours 12Hours 0Hours 1Hours 2Hours ...)
• The Setting Temperature will be raised by
2°F(1°C) 30min. later and by 2°F(1°C) after
another 30 min.
- STARTING OPERATION
• Every time you push this button, when the air conditioner
is not operating, timer is set as follows. (1Hour 2Hours
3Hours 4Hours 5Hours 6Hours 7Hours
8Hours 9Hours 10Hours 11Hours 12Hours
0Hours 1Hours 2Hours ...)
AIR SWING BUTTON
This button can automatically control the air
flow direction.
REMOCON SIGNAL RECEIVER
5
OPERATION
TEMP
3
AIR
TIMER
SWING
7
MODE FAN SPEED
4
ECONOMY