About The Controls On The Air Conditioner; Controls - Panasonic HQ-2051RH Installation And Operating Instructions Manual

Panasonic room air conditioner installation and operating instructions hq-2051rh
Table of Contents

Advertisement

Available languages

Available languages

About the Controls on the Air Conditioner

The controls will look like one of the following:

Controls

OFF
FAN
COOL
HIGH
HIGH
LOW
LOW
THERMOSTAT
6
5
4
7
3
8
2
9
1
10
• FOR NORMAL COOLING
1. Turn the operation switch to the High Cool or the Low Cool setting.
2. Set the thermostat control to the desired temperature mark
starting position). If the room temperature is not satisfactory after a reasonable time,
adjust the control to a cooler or warmer setting, as appropriate.
• FOR MAXIMUM COOLING
1. Turn the operation switch to the High Cool setting.
2. Set the thermostat control to the largest
• FOR QUIETER OPERATION
1. Turn the operation switch to the Low Cool setting.
2. Set the thermostat control as needed.
• CAUTION
When the air conditioner has performed its cooling operation and is turned off or set to the fan
position, wait at least 3 minutes before resetting to the cooling operation again.
Off
OFF
High Fan - High speed fan operation without cooling.
Low Fan
High Cool - Cooling with high speed fan operation.
Low Cool - Cooling with low speed fan operation.
This automatically controls the temperature of the indoor air.
TEMP CONTROL
Turn the knob so that arrow points to the larger marks for
5
6
7
4
greater cooling.
3
8
Point the arrow to the smaller marks for more moderate
2
9
cooling.
1
10
(i.e. the higher the number, the greater the cooling)
temperature mark.
10
- Turns air conditioner off.
- Low speed fan operation without cooling.
5
(the mid-point is a good
5

Advertisement

Chapters

Table of Contents
loading

Table of Contents