Using the Camera with a Macintosh
Install the required software in accordance with what version of the Macintosh OS
you are running and what you want to do.
When you want to
do this:
Save images to your
Macintosh and view
them there manually
Save images to your
Macintosh
automatically/
Manage images
Play movies
Connecting the Camera to Your Computer and Saving Files
IMPORTANT!
• The camera does not support operation with Mac OS 8.6 or earlier, or Mac OS X
10.0. Operation is supported with Mac OS 9, X (10.1, 10.2, 10.3, 10.4, 10.5, 10.6)
only. Use the standard USB driver that comes with your supported operating
system.
. To connect the camera to your computer and save files
1.
Turn on the camera and press [MENU].
2.
On the "Set Up" tab, select "USB" and then press [6].
3.
Use [8] and [2] to select "Mass Storage", and then press [SET].
Operating
System Version
OS 9
OS X
OS 9
OS X
OS 9 / OS X
152
Install this software:
Installation not required.
Use commercially available
software.
Use iPhoto, which comes bundled
with some Macintosh products.
You can playback with QuickTime,
which comes bundled with your
operating system.
Using the Camera with a Computer
See
page:
152
155
155