Table of Contents
Advertisement
Available languages
Available languages
Volume
Rotate the volume knob or press
the sound by pressing
Presets
To store an radio preset, press and hold FAV/BT PAIR on the device or FAV on the remote
control, the display shows the "Save to Preset" screen. Select one of the 10 presets, press
OK to confirm.
To select a preset, press FAV/BT PAIR on the device or FAV on the remote control, the display
shows the "Recall from Preset" screen. Select one of the listed preset stations, press OK to
confirm.
Shortcut to preset recall 1-10 favorite stations by directly pressing numbers directly on the
remote control.
When a preset station is playing, it shows
Now playing information
While stream/DAB/FM is playing, the screen shows some information about the station, press
MENU/INFO on the device or INFO on the remote control to view.
NOTE: The device may process large amount of data after a period of operation, no matter in which
mode, it will cause the system freeze or malfunction. Reboot the device if necessary.
FIRST-TIME SETUP
Selecting the menu language
Rotate the knob to select the menu language you want from the list and press OK to confirm.
When powering the device on for the first time, it displays information of privacy policy. Press
OK to continue. Then a setup wizard appears for helping you setup the main use of the device.
Select "YES" and confirm your selection and launch the setup wizard. Setup wizard helps you
setup the main use of the device.
NOTE: If you select "NO", the next window will ask you choose if you want to start the setup wizard again
next time you power the device on.
Setting date and time
Select "12" for 12-hour display format or "24" for 24-hour display format. If you select the 12-
hour format, the display shows "AM" in the morning or "PM" in the afternoon after the time.
After this, the following options are available, to define if the time to be synchronized from
radios: "Update from DAB", "Update from FM", "Update from Network" or "No update".
Note: If you choose "Update from Network" you must indicate your time zone in the next window. If you
choose "No update", you will have to enter the date and time manually. "AM"/ "PM" displays only if
you have chosen the 12-hour time format. Select "AM" for the morning hours or "PM" for the afternoon
hours.
Next choose "ON" for summer time, otherwise select "OFF".
Setting network
Firstly the device asks if keep network connected.
Note: If you want to control the device in all operating modes via the app, select "YES". If choosing "NO",
it is not possible to control the device from the app in the (Standby, AUX IN, FM, DAB) operating modes.
The power consumption in standby mode will be higher when the network connection is kept up.
Any WLAN networks found are listed on the display, along with their names. After selecting the
network, you will be asked to input a password. To enter the password, use the reel or direction
keys on the remote control to move the cursor through the characters and press OK to confirm.
As each character is selected, the key is built up near the top of the display. There are three
options accessible by tuning the navigate reel back before the first characters – Backspace, OK
and Cancel.
/
on the remote control to adjust the volume. Switch off
on the remote control.
1,
2, etc. at the bottom of the screen.
EN
Advertisement
Table of Contents
