If you are connected to a wireless LAN, the IAP name is
displayed. To start the web browser using this IAP, select
the status and the option
Continue Web
the connection in the wireless LAN, select the status and
the option
Disconnect
WLAN.
If wireless LAN scanning is off and you are not connected
to any wireless LAN,
WLAN scanning off
set scanning on and search for available wireless LANs,
select the status
WLAN scanning
To start a search for available wireless LANs, select a status
and the option
Search for
scanning off, select a status and the option
scanning
off.
To access the WLAN wizard in the menu, press
select
Internet
>
WLAN
wiz..
Wireless LAN access points
To search for wireless LANs available within range, press
, and select
Internet
>
WLAN
a wireless LAN, select
Options
view the details of a network shown in the list, select
Options
> Details.
When an application asks you to select an access point,
select the created access point. You can also create an IAP
by selecting
Search for
WLAN.
browsing. To end
is displayed. To
off.
WLAN. To set wireless LAN
WLAN
, and
wiz.. To create an IAP in
>
Define access
point. To
You can also use
Conn. mgr.
"Connection
manager", on page 82.
Operating modes
There are two operating modes in wireless LAN:
infrastructure and ad hoc.
The infrastructure operating mode allows two kinds of
communication: wireless devices are connected to each
other through a wireless LAN access point device, or
wireless devices are connected to a wired LAN through a
wireless LAN access point device.
In the ad hoc operating mode, devices can send and
receive data directly with each other. To create an IAP for
an ad hoc network, see
"Access
Copyright © 2006 Nokia. All rights reserved.
to create IAPs. See
points", on page 99.
73