Nokia 8860 Owner's Manual page 45

Note: The order of the following steps may vary, depending on which
dialing sequence your card uses.
• Enter access number when prompted for the calling card's access
number (usually the 1-800 number listed on the back of the calling
card). Press OK.
Note: You can also retrieve the access number from your phone book if it
has already been stored. Simply press Search, then
the number.
• Enter card number and/or PIN when prompted to enter calling card
number and personal identification number. Press OK. Press OK again
at Save changes?
• Press or
name using your phone's keypad. Press OK.
Note: See "Entering letters and numbers" on page 21 if you need help on
entering the card name.
For details about your phone's security code, see "Security code" on page 58.
Dialing sequence
Access no.
+ phone no.
+ card no.
Access no.
+ card no.
+ phone no.
Prefix
+ phone no.
+ card no.
*These calling cards are frequently used with these dialing sequences.
However, they may vary and are subject to change at the phone
company's discretion.
to Card name and press Select. Enter the card
Use for cards that require
you to:
Dial 1-800 access number,
then phone number, then card
number (+ PIN if required)
Dial 1-800 access number,
then card number (+ PIN if
required), then phone number
Dial the prefix (any numbers
that must precede the phone
number) and phone number
you want to dial, then card
number, (then PIN, if required)
[ 40 ]
or to find
Cards using this
sequence
*
MCI, AT&T True
Choice, Sprint
Canada, Unitel
networkMCI,
WorldPhone
MCI
GTE, PacBell,
AT&T, Stentor