NETGEAR RangeMax WPN311 User Manual page 26

User Manual for the NETGEAR RangeMax™ Wireless PCI Adapter WPN311
Configure your WPN311 and save the Profile.
a. Click the system tray icon to open the
WPN311 Smart Wizard Wireless
Assistant.
The Settings page opens.
b. Change the Network Name SSID to
match your network.
Tip: Instead of typing in the SSID, you
can use the Network tab to view the
available wireless networks.
Double-click on the desired network.
c. Click Apply to activate the connection.
d. Enter a name for your profile and click
the Save Profile button to store the
current settings.
Tip: If you use your notebook PC to
connect to a wireless network at work
and at home, create profiles called
work and home.
Note: This procedure assumes you are
connecting to a wireless network
which is not using WEP security. If
your network includes WEP settings,
enter the security information in the
Security section. For help with these
steps, see "Enabling Wireless Security
Features" on page
3 -1 0
4-8.
W P N 3 1 1 system tra y icon
Note: T h e N E T G E A R d efa u lt settin gs a re
Infrastructure mode, with ANY for th e wire less
n etwork n a m e S S I D , a n d W E P d isa b led .
S ystem Tra y I con
B a sic S e tu p