Volume Control; Reset Control - NEC MultiSync XP29, XM29 Xtra User Manual

Volume Control

The Volume control allows you to adjust the volume.
R G B
V O L U M E
B A S S
T R E B L E
B A L A N C E
S U R R O U N D M O D E
VOLUME : Pressing + or - increases or decreases the volume.
NOTE: When you mutes the sound, the MUTE display appears.
BASS : Increases or decreases the bass.
TREBEL
: Increases or decreases the treble.
BALANCE : Adjusts the balance between the right and left speakers.
SURROUND MODE : Selects OFF, MOVIE, and MUSIC in this order.
1. OFF : Turns off the surround effect.
2. MOVIE : Gives a surround effect for cinema.
3. MUSIC : Gives a surround effect for music.
All Visual Settings
R G B
A L L R A S T E R N O R M A L
A L L V I S U A L N O R M A L
A L L N O R M A L
P R E S S
' P R O C E E D ' T O R E S E T
The above warning statement will appear to confirm that you do want to reset
all visual settings. If you want to reset all visual settings, press PROCEED.
The following items can be reset:
BRIGHTNESS, CONTRAST, COLOR, TINT, SHARPNESS, COLOR TEMP.,
R-GAIN, G-GAIN, B-GAIN, R-BIAS, G-BIAS, and B-BIAS.
DV CV
DV CV

Reset Control

The Reset control allows you to return image parameters to factory presets.
All Raster Settings
R G B
A L L R A S T E R N O R M A L
A L L V I S U A L N O R M A L
A L L C O N V E R G E N C E N O R M A L
A L L N O R M A L
P R E S S
' P R O C E E D ' T O R E S E T
The above warning statement will appear to confirm that you do want to reset
all raster settings. If you want to reset all raster settings, press PROCEED.
The following items can be reset:
H-POSITION, H-WIDTH, PIN-CUSHION, PIN-BALANCE, PIN-CORNER
TOP, PIN-CORNER BOTTOM, V-POSITION, V-HEIGHT, V-LIN1, V-LIN2,
KEYSTONE, TILT, ROTATION and MOIRE CANCELLER.
ALL Convergence Settings
RG B
A L L R A S T E R N O R M A L
A L L V I S U A L N O R M A L
A L L C O N V E R G E N C E N O R M A L
A L L N O R M A L
P R E S S
' P R O C E E D ' T O R E S E T
The above warning statement will appear to confirm that you do want to reset
all convergence settings. If you want to do so, press PROCEED.
The following items can be reset:
H. CONVERGENCE, V. CONVERGENCE, TOP HORIZONTAL1, TOP
VERTICAL1, BOTTOM HORIZONTAL1, BOTTOM VERTICAL1, TOP
HORIZONTAL2, TOP VERTICAL2, BOTTOM HORIZONTAL2, BOTTOM
VERTICAL2.
41
DV CV
DV CV DV CV
42
26