POWER
DEGAUSS
OFF
ON
VIDEO 1
VIDEO 2
RGB 1
RGB 2
POSITION / CONTROL
PROCEED
EXIT
SCAN
7
WIDTH
HEIGHT
SIDE PIN
NORMAL
8
NORMAL
B
BRIGHT CONTRAST MUTE
VOLUME
C
MULTIMEDIA MONITOR
RD-354E
79645721
Raster Control
7 WIDTH ( + / -)
Adjusts the horizontal size of the image.
8 HEIGHT ( + / -)
Adjusts the vertical size of the image.
9 SIDE PIN ( + / -)
Adjusts the curvature of the edges of the left and right side of the display
image either inward or outward. The image should be adjusted to attain a
straight line on the left and right sides.
0 SCAN SELECT
Each time this key is pressed, the picture size switches from OVER SCAN
for large size to UNDER SCAN for small size and vice versa. Normally select
0
OVER SCAN for video display and UNDER SCAN for RGB display.
A NORMAL
A
This key resets the raster adjustment settings of user changeable memory
D
and recalls the factory preset data.
F
E
Visual Control
B BRIGHT (
Adjusts the overall image and screen brightness.
Press and hold
Press and hold
C CONTRAST (
Adjusts the image brightness in relation to the background.
Press and hold
Press and hold
NOTE: The VISUAL CONTROL storing operation is effective only for one
input (VIDEO1, VIDEO 2, RGB 1 or RGB 2).
D NORMAL
This key resets the visual control settings and recalls the factory preset
data.
NOTE: The brightness and contrast adjustment level are factory preset at
the optimum position.
E MUTE
Press to cancel sound ; press again to restore sound.
NOTE: The other ways to restore sound are to press POWER OFF, then
ON or to press VOLUME
F VOLUME (
Adjusts the volume.
Press and hold
Press and hold
/
)
for a brighter picture.
for a darker picture.
/
)
for higher contrast.
for lower contrast.
keys on the remote control unit.
/
)
to increase sound.
to decrease sound.
13
14
12