Using Features While On A Call - Motorola Bluetooth Wireless Hands Free User Manual

Note: Some phones require you to press the Bluetooth Button E twice. See the user's guide
for your phone for more information.
Receiving a Call
To answer an incoming call, do one of the following:
• Press and release (in less than three seconds) the Bluetooth Button E.
or
Press your phone's press the OK/Send/Yes key (depending on your phone), just as you
would to answer a call in privacy mode.
or
• Use voice activation. See "Making a Call with the Car Kit's Internal Voice
Recognition" on page 13.
Ending a Call
To end a call:
• Press and release (in less than three seconds) the Bluetooth Button E. You can also
end a call by pressing the END key on the phone.

Using Features While on a Call

Note: To use the functions described below, a Bluetooth link must be established between
the car kit and your phone. Most phones automatically activate a Bluetooth connection when
you place a call.
Rejecting an Incoming Call
While the phone is ringing, reject the call by pressing and holding the Bluetooth Button E for
more than 3 seconds.
Note: Performance may vary on different phones. For example, for some phones (such as
Ericsson's T68), rejecting an incoming call can break the Bluetooth link.
Transferring a Call
From the car kit to your phone:
• During a call, press and hold the Bluetooth Button E for more than 3 seconds. (Most
phones prompt you to accept the transfer before completing the transfer.)
From your phone to the car kit:
• During a call, press and release the Bluetooth Button E. (Some phones require you to
press the Bluetooth Button E twice. See the user's guide for your phone for more
information.)
Muting and Unmuting a Call
To mute the microphone during a call, press the car kit's mute button. The Mute Button will
flash, and the other party will not be able to hear you.
To un-mute the call, press the mute button again.
14