Symbols On Equipment; Simplified Eu Declaration Of Conformity; Fcc Notice - Nvidia JETSON DEVELOPER KIT Support Manual

SYMBOLS ON EQUIPMENT

This is a universal recycling symbol indicating that the electronic device cannot be disposed of in the trash and must be
recycled according to the regulations and/or ordinances of the local community.
To reduce the risk of electric shock, personal injury, or damage to the equipment, observe the following precautions:
> Follow all cautions and instructions marked on the equipment.
> Please do not eat, drink, or smoke while working with the Jetson Developer Kit.
> Do not bend, drop, crush, puncture, incinerate, or push objects into the Jetson Developer Kit.
> Do not connect or disconnect any cables or perform maintenance or reconfiguration of this product during an electrical storm or
when device is powered on.
> Do not use the Jetson Developer Kit in rain or near sink, or other wet locations. Take care not to spill any food or liquid into the device.
In case the Jetson Developer Kit gets wet, unplug all cables and turn off before cleaning, and allow it to dry thoroughly before turning
it on again.
> Do not expose the Jetson Developer Kit to any gas which is not normally contained in the atmosphere, it may cause defects.
> Never turn on any equipment when there is evidence of fire, water, or structural damage.
> Place the product away from radiators, heat registers, stoves, amplifiers, or other appliances that produce heat.
> Never force a connector into a port. Check for obstructions on the port. If the connector and port don't join with reasonable ease, they
probably don't match. Make sure that the connector matches the port and that you have positioned the connector correctly in relation
to the port.
> Always use an NVIDIA approved power adapter and refer to the manufacturer's instructions or equipment manual for proper
instructions. Do not connect or disconnect the AC Power Adapter with wet hands. The power adapter is intended for indoor use only.
> The board should be powered down and the power removed before plugging or unplugging devices or add-on modules into the
headers. (Wait for the power the red power LED to turn off, or wait for 5 minutes if your system does not have a power LED.) This
includes the camera and display headers, the M.2 connector, the PCIe x4 connector, SATA, and the expansion headers.
> Operate the AC adapter in a ventilated area.
> When you are using the Jetson Developer Kit, it is normal for the system and/or AC power adapter to get warm.
> Do not use conductive tools that could bridge live parts.
> Do not make mechanical or electrical modifications to the equipment.
> Operate and store the Jetson Developer Kit in a place where the temperature is always between 0 and 50°C (32 to122°F).
> Use this product only with approved equipment and/or accessories.
> If the product sustains damage requiring service, disconnect the product from the AC electrical outlet and refer servicing to an
NVIDIA authorized service provider.
> Use only the provided AC adapter and power cord. Use of any other AC adapter or power cord may present risk of fire or electric shock.

SIMPLIFIED EU DECLARATION OF CONFORMITY

Hereby, NVIDIA Corporation declares that the radio equipment type IEEE 802.11
2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: developer.nvidia.com/
embedded/support.

FCC NOTICE

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including any interference that may cause undesired operation of the device.
JETSON POWER RATING
5.5VDC:14.5A ~ 19.6VDC:4.74A
176-0325-001-jetson-tx1-tx2-developer-kit-support-guide-r6.indd 3
/Bluetooth device is in compliance with Directive
™ ®
Jetson Developer Kit Support Guide | Page 3
EN
10/25/18 2:09 PM