Inserting A Sd/Mmc Card; Changing The Faceplate - Mio DigiWalker H610 User Manual

Portable gps navigator

Hide thumbs Also See for DigiWalker H610:

Table of Contents

Inserting a SD/MMC Card

Your device has an SD/MMC slot where you

can insert an optional Secure Digital or

MultiMediaCard storage card.

To use a card, insert it into the slot, with the

connector pointing to the slot and its label

facing the front of the device.

To remove a card, first make sure that no

application is accessing the card, and then

slightly push the top edge of the card to release

it and pull it out of the slot.

NOTE:

Make sure that no foreign objects enter the slot.

Keep a SD or MMC card in a well-protected box to avoid dust and humidity when you are

not using it.

Your device has a detachable faceplate. Your can replace it with an extra faceplate

(optional) supplied with your device.

1. Firmly press the faceplate release button.

2. Pull the upper part of the faceplate apart to detach it from the device.

3. To install the other faceplate, attach the lower part first and then fit the upper

part into place.

Table of Contents