Plain View (Fig.b); Disassembly Procedure; Important Notes When Bundling The Wiring - Roland KC-600 Service Notes

Jan. 2018

Plain View (Fig.B)

fig.heimenzu-B-KC-400-600.eps
View B
No. Part Code Part Name
p 40017934 SCREW M3X6
q 40013001 SCREW M4X8

Disassembly Procedure

Detaching the Chassis Assy
1.
Remove screws f (x 3) in View 5 at Plain View (p. 8).
2.
Remove screws f (x 3) in View 3 and screws f (x 3) in View 4 at Plain View
(p. 8).
3.
Slide the Chassis Assy a short distance toward the rear side and
disconnect wirings (x 3).
4.
Pull out the Chassis Assy slowly.
Detaching the Speaker
1.
Remove screws a (x 8) in View 1 at Plain View (p. 8) and detach the Grill
Assy.
2.
Remove screws c (x 4) and d (x 8) in View 2 at Plain View (p. 8).
3.
Detach the speakers slowly and disconnect wirings connected to the
speakers.
* When connecting the wirings, refer to the following figure.
fig.bunkai-tejun.eps
Tweeter
Brown
Orange
q
p
Woofer
Red
Black
q
Description
PAN MACHINE W/SW+PW(L) FE ZC
PAN MACHINE W/SW+PW BZC
Important Notes When
Bundling the Wiring
* When bundling the wiring, give attention to the following points.
fig.wire-clamp-e.eps
Cross the left and right
wirings and bundle them.
KC-600
p
Q'ty
11
3
Do not bundle
this wiring.
15