Connections For Supporting Universal Power Supply - Bosch AMC2 Installation Manual

AMC2 enclosure with 1 DIN rail
Connecting the cover grounding cable (D)
1.
2.
Refer to
–
3.3 Connections for supporting Universal
Power Supply
Precondition: Before switching to battery operation, disconnect
the AC power cable.
Use the battery cable with the fuse (G) for the battery
connection.
Notice!
i
Use 12 V 7 (7,2) Ah lead batteries only.
Notice!
i
Change the lead batteries every 5 years.
Bosch Security Systems B.V.
Connect the mounted grounding cable (see position D of
Parts included, page 6 ) to the cover grounding point
(Figure 1.1, position 1) and to the grounding point on the
cover of the enclosure.
Make sure that the screws of the two earthing points are
sufficiently tightened.
Parts included, page 6
Connections | en
2021-03 | V06 | F.01U.330.018
13