Maytag BRAVOS W10420491A Use And Care Manual page 19

TROUBLESHOOTING
First try the solutions suggested here or visit our website to possibly avoid the cost of a service call ...
If you experience
Error Code Appears in Display (cont.)
dU (Lid cannot unlock)
appears in display
F## code (F-type
error code) appears
in display
Fd (Factory Default)
In USA, www.maytag.com/help - In Canada, www.maytag.ca.
Possible Causes
Objects on washer lid prevent it from
unlocking.
System error code.
Washer sets back to factory default.
Remove objects, such as a basket of laundry, from the top of
the washer.
Press START/PAUSE once to clear the code. Then press
START/PAUSE again to restart washer. If code appears again,
call for service.
To return all options and modifiers to Factory Default, press
POWER/CANCEL, select Drain & Spin cycle, and then press
Extra Rinse, Fabric Softener, Extra Rinse, Fabric Softener within
5 seconds. When done correctly, the 7-segment displays show
"Fd" for 3 seconds and then unit returns to Standby Mode.
Solution
19