P5000.5 / 5 Channel Amplifier Feature Description And Applications - Crunch PowerZone P 1400.2 User Manual

Powerzone series
Hide thumbs Also See for PowerZone P 1400.2:
Table of Contents

Advertisement

P5000.5 / 5 CHANNEL AMPLIFIER FEATURE DESCRIPTION
The 5 channel amp have the same features as the 4 channel models accept that there is an additional set of controls for channel 5
The X-OVER slide switch selects the internal crossover functions:
-The input signal is routed directly to the LINE OUT RCA jacks, regardless of the X-OVER setting simplifying daisy chaining of amplifiers.
-HPF: Selects the built in HIGH PASS filter, variable from 10 Hz to 150Hz.
-FULL: Bypasses all crossovers for full frequency range operation.
-LPF: Selects the built in LOW PASS , variable from 30 Hz to 150Hz for channel 5 only.
MODE: The mode switch allows you to choose 4 or 5 channel operation.
LINE INPUT: The line input accepts unbalanced (RCA) inputs from 0.2V to 5V.
SUBSONIC: Is adjustable from 15Hz to 55Hz for the channel 5 only.
BASS EQ: Is adjustable from 0dB to 12dB for channel 5 only.
REMOTE: this is used for the PZiR-1 Bass Remote module.
CH5
L
R
CH5
AMPLIFIER APPLICATIONS
5 CHANNEL FULL RANGE SYSTEM
Here we show how to use the channel amplifier as straightforward discrete 5
channel full range units.
Interconnect cable checklist:
- Connect the four inputs of the amplifier to a Radio/CD with quality RCA cables.
Switch setting checklist:
- 1/2CH X-OVER: FULL
- 3/4CH X-OVER: FULL
Crossover frequency control checklist:
Channels 1/2:
- HI PASS: N/A
- LOW PASS: N/A
DESIGNATED MONO
CHANNEL 5 INPUTS
FULL RANGE
STEREO LINE
INPUTS
8
3/4 CH CONTROLS
CH4
CH2
LEVEL
FULL
HPF
5V 0.2V
X-OVER
5V 0.2V
LEVEL
CH3
CH1
INPUT
1/2 CH CONTROLS
MODE
HPF
LEVEL
4CH
5CH
10Hz 150Hz
5V 0.2V
15Hz 55Hz
0dB 12dB
SUBSONIC
BASS EQ
5 CH CONTROLS
Channels 3/4:
- HI PASS: N/A
- LOW PASS: N/A
Level control checklist:
- Refer to the section "Setting up systems after installation for best performance"
Minimum final loudspeaker impedances:
- 2-Ohms per channel.
HPF
REMOTE
FULL
HPF
10Hz 150Hz
X-OVER
POWER
30Hz 150Hz
LPF
PROTECT
CHASSIS GROUND
REMOTE TURN-ON
TO BATTERY + 12 Volts VIA FUSE
SUBWOOFER
FULL RANGE
SPEAKERS

Advertisement

Table of Contents
loading

Table of Contents