HP LTO-6 Ultrium FH SAS Getting Started Manual page 12

1. Remove plastic cover and connect SAS cable
to new HBA
3. SAS connector to tape drive
5. Example SAS cable (not included in
product)
Figure 6 Cabling to a new HBA
3. Connect the other end of the SAS cable to the tape drive.
LTO-6 and LTO-5 tape drives: Connect a spare power cable from the server's internal power
supply to the power connector on the SAS data cable.
12 Installing an internal tape drive
2. New SAS HBA
4. Power connector to server (LTO-6 and
LTO-5 only)
6. Unused connector on SAS cable (do not
remove plastic cover)