Conclusion - Ramsey Electronics UAM4 Manual

just too lazy to go through the above procedure? Here's a simple solution. If
you find that when you connect the same signal to both the left and right
inputs and the sound seems to be coming from each speaker separately and
not in a place between them, the speakers or input signals are out of phase.
Check that you have applied the input signal in the same way to both inputs.
If they are correct then your speakers are connected out of phase. Simply
reverse the speaker wires on one of the speakers and the sound will now be
in phase and appear between the speakers!

CONCLUSION

We sincerely hope that you will enjoy the use of this Ramsey product. As
always, we have tried to compose our manual in the easiest, most "user
friendly" format that is possible. As our customers, we value your opinions,
comments, and additions that you would like to see in future publications.
Please submit comments or ideas to:
Ramsey Electronics, LLC
Attn. Hobby Kit Department
590 Fishers Station Drive
Victor, NY 14564
or email us at: techsupport@ramseyelectronics.com
UAM4• 30