Channel Setup Menu; Channel Search - Magnavox 50ML8205D/17 Owner's Manual

Channel Setup Menu

The channel setup menu helps you
to configure and set up chan-
nels.You can set the tuner for sig-
nals from the antenna or a cable
receiver, search for channels, and
edit the favorite channels
.
Component
Tuner Mode

Channel Search

Manual Search
Favorite Channel
Reset Channel
† This selection is only available when the input signal is digital.
Channel Search
Use this option to start scanning for channels automatically as follows:
1. Select the Channel Search item
from the channel setup menu
and press to start scanning
for channels automatically.
Scanning begins.
2. Press OK at any time to stop
scanning.
Using the OSD menus
Main Menu
Picture
Sound
Size
PIP/PBP
Parental Control
Channel Setup
Setup
Exit
Function
Specifies antenna or cable input for the
Analog signal.
Specifies antenna input for the Digital signal.
Scans for channels automatically. See
"Channel Search" below.
Enables you to manually search for chan-
†
nels.
Edits the favorite channel list. See "Favorite
Channel List" on page 28.
Clears all channels that were added to the
channel list using the Channel Search fea-
ture. After using this function, use Channel
Search to rescan for channels.
Digital signal auto scan OSD
Tuner Mode
Channel Search
Manual Search
Favorite Channel
Reset Channel
Back
Range / Options
Antenna, Cable
–
2 ~ 69
–
–
†
Auto Scanning
Antenna
RF Channel: 11
Major Number: 2
27
Antenna Cable
Press right
30
Edit Press right
Auto Scanning
Cable
RF Channel: 11
RF Channel: 11
Analog signal auto scan OSD