Pip/Pbp Menu - Magnavox 50ML8205D/17 Owner's Manual

PIP/PBP Menu

The PIP/PBP menu provides various
options for the PIP and PBP modes.
The PIP mode helps you to watch
one program on the full screen, and
another program on a smaller
pop-up window, which can be posi-
tioned in any of the four corners of
the screen. The PBP function
divides the viewing area into two
halves, allowing the simultaneous
viewing of two programs in win-
dows placed side by side. Refer to
the following table to learn about the various menu items:
Component Function
Mode Enables single, PIP, or PBP mode.
PIP Position Sets the position of the PIP window in one of
the four corners of the screen.
PIP Size Selects the size of the PIP window
Sound Source Selects the sound source to be outputted
through the speakers.
Refer to the following tables for PIP/PBP combinations:
Main Sub window
Component S-Video
VGA Composite
DTV ATV
HDMI
For instance, if the main window displays the Component input signal, you can select the
S-video, Composite, or ATV inputs as the sub window.Similarly, if the main signal is the
Composite input, the sub window can display the Component, VGA, DTV, or HDMI inputs.
Notes
• You can also use the PIP/PBP, PIP SIZE, ACTIVE, SWAP, and POSITION buttons on the
remote control to activate and control the PIP or PBP mode. See page 4.
• Use the SWAP button to switch programs between the main and secondary windows in
PIP/PBP mode.
Using the OSD menus
Main Menu
Picture
Sound
Size
PIP/PBP
Parental Control
Channel Setup
Setup
Exit
23
Mode
PIP Position
PIP Size
Sound Source
Back
Range / Options
Single, PIP, PBP
Top left, Top right, Bottom right,
Bottom left
Small, Medium, Large
Main, Sub
Sub window Main
Component S-Video
VGA Composite
DTV ATV
HDMI
Single PIP PBP
Small Medium Large
Main Sub