On-Timer - Magnavox 20MS3442/17 Owner's Manual

To turn on the TV to a specific channel at a
specific time, use the On-Timer. Before you
begin, set the clock correctly. Details are on
page 18.
Press MENU to see the menu.
Press VOL+ or VOL- to highlight
(Timer).
Press CH- to enter
Press CH+ or CH- repeatedly to
highlight Channel.
Press VOL+ or VOL- to enter the
channel number. This will be the
channel to which the TV turns on
at the specified time.
Press CH+ or CH- repeatedly to
highlight TV/CATV.
Press VOL+ or VOL- to select TV or
CATV, depending on whether you have
Cable TV service or not. Details are on
page11.
Press CH+ or CH- repeatedly to
highlight On time.
Press VOL+ or VOL- to select Once
(or Daily, Off).
If you select Once, the timer will turn
on the TV one time within the next 24
hours only.
If you select Daily, the timer will turn
on the TV at the same time and to the
same channel every day.
Choose Off to cancel the On-timer.
Press CH+ or CH- repeatedly to
highlight 0: 00 under the line of On
Time.
Press VOL+ or VOL- to enter the On
time. Hold down VOL+ or VOL- to
change the time quickly in 10-minute
increments. This will be the time at
which the TV will turn itself on.
Press MENU repeatedly to remove
the menu from the screen or the menu
will automatically disappear within a
few seconds if no buttons are pressed
on the remote control.

On-Timer

submenu.
Timer
Color
Brightness
Contrast
Sharpness
Tint
Blue Back
C. Temp Normal
,
19
50
50
50
50
Off Time
50
On
On Time
Channel
TV/CATV
Clock
Off Time
On Time
Channel
TV/CATV
Clock
Off Time
On Time
Channel
TV/CATV
Clock
Off Time
On Time
Channel
TV/CATV
Clock
Off Time
On Time
Channel
TV/CATV
Clock
Off
0:00
Off
0:00
2
TV
9:30
Off
0:00
Off
0:00
12
TV
9:30
Off
0:00
Off
0:00
12
TV
9:30
Off
0:00
Once
0:00
12
TV
9:30
Off
0:00
Once
11:30
12
TV
9:30