Setting The Clock; Sleep Timer Operation - Magnadyne LINEAR SERIES RV4000 Operation And Installation Manual

Setting the Clock

4. Press the VOLUME knob and the Minute indica-
tors will start flashing.
5. Rotate the VOLUME knob until the correct
Minutes appears in the display. Wait 5 seconds
and the colon between the hours and the min-
utes will start flashing indicating the clock is set.

Sleep Timer Operation

Setting the Sleep Timer:
1. Press the SLP button until the "SLP 10"
appears in the display.
2. Keep pressing the SLP button again until the
desired sleep time appears in the display (00,
10, 20, 30, 40, 50, 60, 70, 80 minutes).
3. Wait 5 seconds and the display will return to
normal operation and "SLP" will appear in the
display.
4. After the designated sleep timer has expired
the unit will turn off automatically.
Cancelling the Sleep Timer:
1. Press the SLP button until "00" is displayed.
2. Wait 5 seconds and the display will return to
normal operation.
8
(Continued)
1
EQ
2
AS/PS
3
SLP
4
ALM
5
DISP
6
DIM
1
EQ
2
AS/PS
3
SLP
4
ALM
5
DISP
6
DIM
1
EQ
2
AS/PS
3
SLP
4
ALM
5
DISP
6
DIM
PM
PUSH
SPEAKER
A B
AUX AM/FM DISC
RESET AV
HEADPHONES
PM
PUSH
SPEAKER
A B
AUX AM/FM DISC
RESET AV HEADPHONES
PUSH
SPEAKER
A B
AUX AM/FM DISC
RESET AV HEADPHONES