Button Locations And Functions - Magnadyne LINEAR SERIES RV4000 Operation And Installation Manual

Button Locations and Functions

27
26
EQ
25
24
AS/PS
23
22
SLP
21
20
ALM
19
18
DISP
17
16
DIM
1. Power On/Off: Press to turn the unit on or off.
2. Disc Door: To play a disc, insert the disc with label facing forward.
3. Disc Door Release: Press to open the door so the disc can be inserted.
4. Auxiliary Button (AUX): Press to choose auxiliary audio in mode.
5. Display Area: This area displays all function information for the radio, clock, disc player and auxiliary
input device.
6. Mute Button: Press to mute the audio, press again to restore the audio.
7. Speaker Selection Buttons: Press to switch the speakers sets A and B on and off.
8. Disc Button: Press to select the music player mode.
9. Radio Button (AM/FM): Press to select the radio mode. Sequential presses will select radio band:
FM 1, FM 2, FM 3, AM 1 and AM 2.
10. Play/Pause Button (
11. Seek Down (l
��
Radio Mode: Press to tune the radio to a lower or higher radio station.
Disc Mode: Press to search for the beginning or next track.
12. Volume and Select Button: Rotate to increase or decrease the volume level. Press to select the sound
controls: Bass, Treble and Balance.
13. Headphone Socket: Accepts 3.5mm stereo headphone jacks.
14. Audio Input Jack: Press the AUX button until "Audio" appears in the display then plug in a device via
the 3.5mm audio input socket.
Note: The RV4000 does not control the device, it just allows the audio to be played through the system.
15. Reset Button: Press to reset the unit to it's default settings.
1
1
2
3
4
5
6
ll): Press to pause disc play, press again to resume play.
�
), Seek Up ( l) Buttons:
��
2 3
PUSH
3-Beam Laser Pickup
4 5
SPK FM ST
SPEAKER
A B
AUX AM/FM DISC
RESET AUX HEADPHONES
15 14
6
7
8
9
10
11
12
13
3