Kitchen Timer Mode - Magic Chef MCT9E1ST Instruction Manual

KITCHEN TIMER MODE

Timer operates as a minute timer, can be set to delay cooking and used to set a holding time after
cooking.However delay cooking can not be programmed for defrost.
Timer operates without microwave energy.
HOW TO USE AS A MINUTE TIMER
2. Press the amount of time you want to count down.
3. Touch Microwave START pad.
The TIMER indicator starts blinking and the display counts down the time remaining in KITCHEN TIMER
mode. When KITCHEN TIMER mode ends, you will hear 3 beeps.
HOW TO USE TO DELAY THE START OF COOKING
2. Press the amount of time you want to delay.
4. Touch Microwave START pad.
When you touch START pad, the TIMER indicator starts blinking and the display counts down the time
remaining in KITCHEN TIMER mode. When KITCHEN TIMER mode ends, the oven will beep.
The TIMER indicator goes off and M/W indicator starts blinking. The display counts down the time
remaining in M/W mode. When M/W cook ends, you will hear 3 beeps.
HOW TO USE TO SET A HOLDING TIME
3. Press the amount of time you want the oven to hold.
4. Touch Microwave START pad.
The M/W indicator starts blinking and the display counts down the time remaining in M/W mode. When
the M/W cook ends, the oven will beep. The M/W indicator goes off and TIMER indicator starts blinking.
The display counts down the time remaining in KITCHEN TIMER mode. When the KITCHEN TIMER
mode ends, you will hear 3 beeps.
NOTE: Your oven can be programmed for 59 minutes 99 seconds. (59:99)
1. Touch TIMER pad.
1. Touch TIMER pad.
3. Program the desired power
level and cooking time for food
to be cooked.
1. Program the desired cooking
Time.
2. Touch Kitchen Timer pad.
The TIMER indicator lights and " : 0" is
displayed.
The display will show what you touched.
The TIMER indicator lights and " : 0" is
displayed.
The display will show what you touched.
The M/W indicator lights and the selected
power level & cooking time are displayed.
The M/W indicator lights and the selected
time is displayed.
The TIMER indicator lights and " : 0" is
displayed.
The display will show what you touched.
16