Mitsubishi MELSEC-Q Series User Manual page 341

9
UTILITY OPERATION
I/O assignment settings
System settings
Item
Power model
Extension cable
Slots
Base
setting
Base mode
,
8 slot default
button
12 slot default
Import multiple CPU parameters
button
button
Default
(2) Switch settings for I/O and intelligent function module screen
Table9.28 Explanation of Switch settings for I/O and intelligent function module screen
Item
Input format
Slot, Type, Model name
*1
Switch 1 to Switch 5
button
End
button
Cancel
Table9.25 Explanation of I/O assignment settings screen (Continued)
Multiple CPU settings
Set the model name of the power supply module installed.
Set the model name of the extension cable.
Specify the number of the slots of the base unit.
(Initial value: None, Setting range: 2, 3, 5, 8, 10, 12)
Select Base mode from "Auto" and "Detail".
(Initial value: "Auto", Setting range: "Auto", "Detail")
Batch-sets the base unit to the specified number of slots.
Reads the multiple CPU parameters out from either of the following files.
• Project file created by GX Developer
• Parameter setting file created by C Controller setting utility
Changes the settings to the initial values.
Set the I/O module and intelligent function module switches.
Figure 9.44 Switch settings for I/O and intelligent function module screen
Select the numerical input format from BIN., DEC. and HEX.
(Initial value: "HEX.", Setting range: "BIN.", "DEC.", "HEX.")
Displays the "Slot", "Type", and "Model name" set on the "I/O assignment
settings" screen.
Set the switches of the intelligent function module.
Saves the settings and closes the "Switch settings for I/O and intelligent
function module " screen.
Closes the "Switch settings for I/O and intelligent function module" screen
without saving the settings.
* 1 In a multiple CPU system configuration, the data set in this item must be identically set to each of
all CPUs.
Communication diagnostics
Description
Description
9.2 C Controller Setting Utility
9.2.8 Operating I/O assignment settings screen
9
Reference
section
10
6.3
6.3
11
6.3
9.2.12
12
13
14
Reference
section
15
4.13
This section
(1)
4.13
16
9
- 50