commercial cool CCF45P10 User Manual page 14

ENGLISH
SET UP & USE
8. LIGHT KITS
A. DETACHABLE LIGHT KITS
• Remove light kit screws and washers.
• Connect polarized connectors of light kit to corresponding connectors found in
switch housing.
WARNING: BE SURE TO TURN OFF POWER BEFORE
• Carefully tuck electrical wires back into switch housing, align light kit with
switch housing and secure using the three included light kit screws and
washers.
• Place shades on light kit and secure using included thumb screws or push
and turn for pop-off style shades. (See Fig.10a, Fig.10b).
• Install proper wattage and type of bulb identified on light kit or shade.
Switch
Housing
White
Wires
WARNING: Ensure that all connections, set screws and screws are securely
tightened before the next step.
To clean the fixture, turn off the power, wait for it to cool, and wipe the fixture with
a clean, soft cloth.
Page 14
INSTALLING
Motor
Fig. 10b
Light Kit
Thumb Screw
Light Kit Lock Washer
Shade
Fig. 10a
Red, Blue or
Black Wires
Black, Blue or
Red Wires
Light Kit
Screws