commercial cool CCF45P10 User Manual page 13

SET UP & USE
7. MOUNTING BLADES TO MOTOR
• Take out hardware containing motor screws, lock washers and gaskets.
• Place lock washers over motor screws, position motor screws in blade brackets,
place fibre bracket gaskets over screws and secure to motor.
• Make sure all screws are tightened securely.
Remove Rubber Stops (optional)
NOTE: Fan comes with three rubber stops (optional on some models) on motor
for shipping purposes only. Remove stops before running motor or
installing blades to motor.
Fig. 9a
ENGLISH
Motor
Fibre Bracket
Gasket
Fig. 9b
Lock Washer
Motor Screw
Page 13