Grease Filter(S); Non-Ducted Recirculation Filter(S); Stainless Steel Cleaning; Wiring Diagram - NuTone PM300SS Installation Use & Care Instructions

Powerpack inserts
Table of Contents

Advertisement

Available languages

Available languages

MAINTENANCE
ALWAYS SWITCH OFF THE ELECTRICITY SUPPLY
BEFORE CARRYING OUT ANY OPERATIONS ON THE
APPLIANCE .

Grease Filter(s)

The grease filter(s) should be cleaned frequently . Use a
warm dishwashing detergent solution . Grease filter(s) is (are)
dishwasher safe .
Clean the filter(s) in the dishwasher using a non-phosphate
detergent . Discoloration of the filter(s) may occur if using
phosphate detergents, or as a result of local water conditions
- but this will not affect filter performance . This discoloration
is not covered by the warranty . To minimize or prevent
discoloration, hand wash filter(s) using a mild detergent .

Non-Ducted Recirculation Filter(s)

The Non-Ducted Recirculation filter(s) should be changed
every 3 to 6 months . Replace more often if your cooking style
generates extra grease, such as frying and wok cooking .

WIRING DIAGRAM

COLOR CODE
BLK
BLU
RED
WHT
LINE/ 120V AC
NEUTRAL
GROUND
14
BLACK
BLUE
RED
WHITE
ELECTRICAL BOX
REF: 99046214_REV-A
MOTOR SWITCH
BLK
LIGHT SWITCH
BLK
WHT
WHT

STAINLESS STEEL CLEANING

Do:
• Regularly wash with clean cloth or rag soaked
with warm water and mild soap or liquid dish
detergent .
• Always clean in the direction of original polish
lines .
• Always rinse well with clear water (2 or 3 times)
after cleaning . Wipe dry completely .
• You may also use a specialized household
stainless steel cleaner .
Don't:
• Use any steel or stainless steel wool or any
other scrapers to remove stubborn dirt .
• Use any harsh or abrasive cleansers .
• Allow dirt to accumulate .
• Let plaster dust or any other construction
residues reach the unit . During construction/
renovation, cover the unit to make sure no dust
sticks to the stainless steel surface .
Avoid when choosing a detergent:
• Any cleaners that contain bleach will attack
stainless steel .
• Any products containing: chloride, fluoride,
iodide, bromide will deteriorate surfaces
rapidly .
• Any combustible products used for cleaning
such as acetone, alcohol, ether, benzol,
etc ., are highly explosive and should never be
used close to a range .
RED (LOW SPEED)
BLK (HIGH SPEED)
BLU
BLK
1
WHT
WHT
2
BLU
BLU
BLK
1
WHT
WHT
2
M M
LED
LIGHT
LED
LIGHT

Advertisement

Table of Contents
loading

This manual is also suitable for:

Bbn1243ssBbn1303ss

Table of Contents