Related Manuals for Hyundai HYPM1600E
Summary of Contents for Hyundai HYPM1600E
- Page 1 PADDLE MIXER HYPM1600E Instruction Manual WARNING: Read the instructions carefully before use.
-
Page 2: Table Of Contents
Contents Specifications……………………....32 Introduction……..……………………………3 Recycling And Disposal..………………...33 Safety Information…..…………………..4-13 Understand Your Machine.…..…………...4 Personal Safety...…….……………………4-5 Declaration Of Conformity…..…………..34 Inspect Your Machine…………………..5 Work Area…….……………………………..6 Notes…………………………………….35-36 During Use…….………………………………7 Batteries…….…………………………………8 Useful Information…..……………………..37 Electricity…….………………...…………...8-9 Our YouTube Channel…..………………..37 Double Insulated Devices…..……..9 Warranty…………………………………….37 Vibrations….…………………………..10 Manual Updates….……………………….37 Noise…….……………………………..10 Returning Your Product….……………….37 Residual Risks…………………....10 Leaving A Review….……………………...37 Intended Use………………………....11... -
Page 3: Introduction.........................................3 Specifications
THE MACHINE. Keep for future reference and pass it on if the machine is loaned or sold to another user. This manual has been produced by Hyundai Power Products and should be kept with the product. Please read and understand these instructions before you use your product. -
Page 4: Safety Information............................4-13 Recycling And Disposal
Safety Information Understand Your Machine • WARNING! You must read these instructions carefully before operating the machine. Make sure that you are familiar with the controls and properly operate the machine. You must learn how to stop the machine quickly. If you do not follow the warnings and instructions, it may result in fire and/or serious injury. -
Page 5: Inspect Your Machine
Safety Information Personal Safety (Continued) • Do not touch parts that might be hot from operation. Allow parts to cool before attempting to maintain, adjust, or service. • Do not overreach. Keep proper footing and balance at all times. This enables better control of the machine in unexpected situations. -
Page 6: Work Area
Safety Information Work Area • You must only work in daylight or with good artificial light in good visibility conditions. Do not work at night, at times of heavy fog, or at any other times when your field of vision might be limited and it would be difficult to gain a clear view of the area. -
Page 7: During Use
Safety Information During Use • Do not operate the machine in confined areas where there may be a risk of crushing the operator between the machine and another object. • Never attempt to make any adjustments, while the machine is running. •... -
Page 8: Batteries
Safety Information Batteries (Where Present) Batteries present a risk if they become damaged by the possible leaking of electrolyte. This electrolyte is an acid and can cause serious burn injuries. Care should be taken when working on or near them. NOTE: the electrolyte may be in a liquid or gel form. -
Page 9: Double Insulated Devices
Safety Information Electricity (Continued) • Power tools plug must match the outlet. Never modify the plug in any way. DO NOT use any adapter plugs with earthed (grounded) power tools. Unmodified plugs and matching outlets will reduce risk of electric shock. •... -
Page 10: Residual Risks
Safety Information Vibrations (Where Applicable) • Prolonged use of hand held (operated) machines will cause the user to feel the effects of/from vibrations. These vibrations can lead to white finger (Raynaud’s phenomenon) or carpal tunnel syndrome. This condition reduces the ability of the hand to feel and regulate temperature, causing numbness and heat sensations and may cause nerve damage and circulatory tissue death. -
Page 11: Intended Use
Safety Information Intended Use The HYPM1600E is an electrical paddle mixer from HYUNDAI. The HYPM1600E uses a standard M14 fitment, 380mm Mixing shaft, supplied with a K3 style Mixing Paddle. It is powered by a 1600W Motor. Maximum miscible material is 40-90 litres. -
Page 12: Personal Protective Equipment
Safety Information Personal Protective Equipment Appropriate Personal Protective Equipment (PPE), MUST be worn at all times when operating or repairing the machine. No protective equipment can ensure 100% protection. When selecting PPE, make sure it’s CE marked and it suits the user in terms of size, fit, etc. -
Page 13: Symbols On The Machine....................13 Product Record
Safety Information Symbols On The Machine We have provided safety messages in this manual and on the machine. This information alerts you to potential hazards that could hurt you or others. Please read these messages carefully. However, we may not have listed all of the possible hazards, you must also use your own judgement. -
Page 14: Unboxing.............................................14 Contact Us
2. Lay the contents out and check them. If any part is damaged or missing, you must not use the machine. Contact HYUNDAI POWER PRODUCTS immediately. 3. You must keep the packaging material in case the machine needs to be returned or repaired. -
Page 15: In The Box
In The Box *Not To Scale Descriptions on next page www.hyundaipowerproducts.co.uk... - Page 16 In The Box Mixer Main Body Mixing Shaft Attached to the Spindle (G). Mixing Paddle A K3 style mixing paddle, connects to the mixing shaft (B). A standard M14 fitment. 2 x Spanners 2 x Spare Carbon Brushes 5 Piece Trowel Set www.hyundaipowerproducts.co.uk...
-
Page 17: Features
Features Mixer Main Body Mixing Shaft Attached to the Spindle (G). Mixing Paddle A K3 style mixing paddle, connects to the mixing shaft (B). A standard M14 fitment. Spindle The output from the 1600W Motor. Gear Selector Switch Switches the Spindle (G) speed between 0-600rpm(Max) to 0-900rpm(Max). Trigger Safety Button This helps prevent accidental starting by pressing the trigger. -
Page 18: Assembly
Assembly Assembly Overview There are 4 steps to the assembly: Step 1 : Combine Mixing Paddle and Mixing Shaft Step 2 : Attach Mixing Shaft to Spindle Step 3 : Tighten Shaft and Spindle Using Spanners Step 4: Tighten Mixing Paddle and Shaft Using Spanners STEP 1 : Combine Mixing Paddle and Mixing Shaft 1. - Page 19 Assembly STEP 2 : Attach Mixing Shaft to Spindle 1. By hand, turn the mixing shaft (B) into the spindle (G) until tight. Troubleshooting on next page www.hyundaipowerproducts.co.uk...
- Page 20 Assembly STEP 2 : Attach Mixing Shaft to Spindle (Continued) Troubleshooting If when trying to tighten the mixing shaft (B) into the spindle (G) and it’s rotating, ensure the gear selector is in a gear position, and use one of the spanners included on the grooves on the spindle (G).
- Page 21 Assembly STEP 3 : Tighten Shaft and Spindle Using Spanners 1. Using the included spanners, tighten the mixing shaft (B) to the spindle (G). Turn Spanner 1 clockwise and Spanner 2 in the opposite direction. This step is made easier by laying the paddle mixer down. www.hyundaipowerproducts.co.uk...
-
Page 22: Tighten Shaft And Spindle
Assembly STEP 4 : Tighten Mixing Paddle and Shaft Using Spanners 1. Using the included spanners, tighten the mixing shaft (B) to the mixing paddle (C). Turn spanner 1 clockwise and spanner 2 in the opposite direction. This step is made easier by laying the paddle mixer down. 2. -
Page 23: Operation
Operation Mixing Tips · When mixing cement or mortar, add dry ingredients to container first followed by liquids. This will prevent dust becoming airborne. · If mixing plaster or cement, roughly combine any powdered materials with liquids, mixing with a trowel/small spade first. This will avoid risk of harmful powders/dust becoming airborne. -
Page 24: Included Trowel Features
Operation Included Trowel Features 280mm Carbon Steel 280mm Carbon Steel 180mm Carbon Steel Plastering Float Brick Trowel Gauging Trowel This is used to ensure This trowel is used for A smaller trowel used for that plaster is as flat and levelling, spreading and smaller applications in smooth as possible. -
Page 25: Using The Paddle Mixer
Operation Using The Paddle Mixer Ensure the mixing container is secure, on a flat surface. An unstable mixing container is likely to tip and/or spill causing harm or danger. 1. In a secure mixing container, fill with the material to be mixed. 2. -
Page 26: Starting
Operation Starting YOU MUST read and understand the full user manual before starting the machine. Before connecting to the mains supply, always check the switch is in the OFF position. 1. Press the trigger safety button (I). The machine will not start if not pressed. 2. -
Page 27: Adjusting Spindle Speed
Operation Adjusting Spindle Speed 1. Turn the gear selector switch to change gear from ‘I’ to ‘II’. This will change the spindle speed from 600rpm (max.) to 900rpm (max.) If the switch doesn’t fully WARNING! Do not leave lock into position, rotate the switch between gears, the mixing shaft slightly this can cause damage and... -
Page 28: Maintenance & Care
Maintenance & Care Carbon Brush Replacement The machine MUST be UNPLUGGED from mains power at all times during maintenance. The carbon brushes should be checked and maintained in 60 hour intervals. You may need to change the carbon brushes if you experience loss of machine performance, or intermittent power. - Page 29 Maintenance & Care Carbon Brush Replacement (Replacement) 2. Remove carbon brush and replace with one included. Replace both sides at the same time. 3. Replace the maintenance plug (K) and tighten with a flat blade screwdriver. If the machine does not operate after maintenance, please contact us.
-
Page 30: General Maintenance
Maintenance & Care General Maintenance WARNING : Turn OFF the machine, allow all moving parts to come to a complete stop, and disconnect the power cord before maintaining the machine. You need to wear proper clothing and protective gloves whenever your hands are at risk. -
Page 31: Troubleshooting
Maintenance & Care Troubleshooting NOTE : All corrective actions should be carried out by suitably qualified person/s. Problem Possible Cause Possible Solution Machine will not start. Fuse in mains plug blown Check fuse in mains plug / faulty and replace is necessary. Internal wiring fault. - Page 32 Technical Data Specification Model HYPM1600E Voltage 230V Frequency 50Hz Input Power 1600W No Load Speed Speed I : 0-600rpm Speed II : 0-900rpm A-Weighted Sound Pressure Level LpA 92dB(A) A-Weighted Sound Power Lever LWA 103dB(A) Uncertainty K. 3dB(A) Guaranteed Sound Power Level...
- Page 33 Recycling & Disposal Recycling & Disposal We do not offer a takeback scheme for the recovery of Waste Electrical Electronic Equipment (WEEE) & Batteries. Instead the responsibility to dispose of WEEE and/or Batteries is passed onto you by us. So when it becomes necessary to dispose of your machine you must take it to your local Civic Amenity Site.
-
Page 34: Declaration Of Conformity
Genpower Ltd Isaac Way, Pembroke Dock, SA72 4RW Country of Origin: China Description: 1600W Paddle Mixer SKU Code: HYPM1600E Date of Issue: 12/04/2021 Regulations and Directives of Compliance • 2006/42/EC The Machine Directive • 2014/30/EU EMC Directive • 2000/14/EC Noise Emissions •... -
Page 35: Notes
Notes www.hyundaipowerproducts.co.uk... - Page 36 Notes www.hyundaipowerproducts.co.uk...
-
Page 37: Useful Information
Go to YouTube and search ‘Hyundai Power Products’. Warranty Proof of purchase will be required before you make a warranty claim. Full warranty terms and conditions can be found on the HYUNDAI POWER PRODUCTS website: www.hyundaipowerproducts.co.uk Manual Updates Our manuals are constantly being reviewed and updated. Should you find an error, omission or something unclear, please contact us for assistance. - Page 38 Product Record Information As soon as you have purchased the machine, we recommend that you fill out the following. If you need to contact an authorised dealer or customer service for information on servicing, you may need to provide the following information. Date Of Purchase:………………………………………………………………………………..
- Page 39 Our friendly aftersales team will be more than happy to help you. Phone Call our team on 01646 687 880 Email aftersales@hyundaipowerproducts.co.uk Online Live Chat Go to www.hyundaipowerproducts.co.uk Post Genpower Ltd, Isaac Way, Pembroke Dock, Pembrokeshire, SA72 4RW. Hyundai Support Website Go to hyundaisupport.co.uk www.hyundaipowerproducts.co.uk...
- Page 40 Importer: GENPOWER LTD Isaac Way, London Road, Pembroke Dock, UK, SA72 4RW. T: +44 (0) 1646 687 880 E: info@hyundaipowerproducts.co.uk www.hyundaipowerproducts.co.uk Imported / Distributed by Genpower Ltd for the United Kingdom & Ireland Licensed by Hyundai Corporation, Korea...