Blending Tips; Frequently Asked Questions - Oster XPERT Series Instructions Manual

With texture control
Hide thumbs Also See for XPERT Series:
Table of Contents

Advertisement

Available languages

Available languages

Liquids
Put liquids into the jar first, unless the recipe says otherwise.
Using the jar lid filler cap
Do not remove the lid while in use. Food may splatter if you do. Instead remove the jar lid
filler cap to add smaller ingredients.
Working with Hot Foods or Liquids
WARNING: When you work with HOT FOODS,
remove the jar lid filler cap to vent steam. Tilt
the lid away from you partially covering the opening.
Keep hands and other exposed skin away from the lid
opening to prevent possible burns.
When you work with HOT LIQUIDS, remove the jar lid
filler cap and start at a low speed, and then gradually
increase to a faster speed. Do not add liquid over the
4-cup level. Always keep hands away from steam.
Ingredients Quantities
Use only the amount of food suggested in the recipes. If you want greater amounts,
prepare in batches. Using larger amounts may overload and strain the motor. You might
also get different results from those described.

FREQUENTLY ASKED QUESTIONS

Why doesn't the blender turn on?
• Make sure the base is plugged in an active power receptacle.
• Verify blinking blue light is active after pushing power button
• For Brazil models only: Make sure the jar is correctly placed onto the base.
How can I prevent liquids from leaking out?
Check to see that the sealing ring is correctly assembled in between the jar blade and the
2 L jar.

BLENDING TIPS

E n g l is h - 11
.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents