Table of Contents
Advertisement
4
Insert the nanoUIM card/microSD card tray into the terminal
• Take care to insert the nanoUIM card/microSD card tray in the
correct direction. If the direction you insert the nanoUIM card/
microSD card tray is incorrect, it may be damaged.
Removing microSD card
1
Insert the tip of the SIM ejector tool into the nanoUIM card/
microSD card tray eject hole horizontally (P.26)
The nanoUIM card/microSD card tray will slightly eject.
• Not inserting the tool in a straight line might result in damage or a
fault.
2
Pull out the nanoUIM card/microSD card tray in a straight
line
3
Remove the microSD card from the nanoUIM card/microSD
card tray
27
Getting started
Advertisement
Table of Contents
