Section I - Recording Audio With The Lambda Studio; Recording Using The Microphone/Line Input - Lexicon Lambda Desktop Recording Studio Owner's Manual

Recording Using the Microphone/Line Input

SECTION I – RECORDING AUDIO WITH THE LAMBDA STUDIO
™
The diagram below shows how the Lambda Studio™ is connected for this particular
setup.
A. RECORDING USING THE MICROPHONE/LINE INPUT
Plug your microphone cable into the Mic 1 XLR jack or line level audio source to the
Line 1 ¼" jack on the back of the Lambda Studio. If the mic needs phantom power,
engage the +48 V switch (on the back of the Lambda Studio).
To set up the software to record:
1. Open Cubase LE.
®
2. Click File and select New Project.
1