D Oor G Rill I Nstallation I Nstruction - Lennox Hearth Products Winslow PS40 Installation And Operation Manual

Door Grill Installation Instructions
Parts Needed:
Qty
(4) Button Head Screws (already in place in stove)
Tools Required:
Qty
(1) 1/8" allen wrench
To install the Grill:
1. Remove the four button head screws from body of the
stove with a 1/8" allen wrench. See Figure 29.
figure 9
2. Pull the scraper rod out, rotate the grill vertically, (with
the notch to the left) and slide the grill over the scraper
rod (slide the rod between the third and fourth bar). See
Figure 30.
Notch
Slider Rod
between rd & th bar
figure 0
button Head Screw
NoTe: DIAGRAMS & ILLUSTRATIoNS ARe NoT To SCALe.
3. Rotate the grill back to the horizontal position and re-install
the four button head screws through the two holes at each
end of the grill and into the stove body. See Figure 31.
Rotate Grill back To Horizontal Position
figure 1
Re-install button Head Screws
figure 
1