Service And Maintenance Safety; Storage Safety; Safety Signs - Titan SNWBLW120 Operator's Manual

Never have the equipment in operation during transport.
•
Always travel at a safe speed.
•

SERVICE AND MAINTENANCE SAFETY

Stop engine, set brake, remove ignition key, and wait for all moving parts to stop before
•
servicing, adjusting, repairing, or unplugging.
Support the equipment with blocks or safety stands before working beneath it.
•
Follow good shop practices including:
•
o keep service area clean and dry
o be sure electrical outlets and tools are properly grounded
o use adequate light for the job.
Use only tools, jacks, and hoists of sufficient capacity for the job.
•
Replace and secure all shields removed during servicing before operating.
•
Use heavy leather gloves to handle sharp objects.
•
Check hydraulics regularly for leaks. Use cardboard to look for leaks, and use hand and
•
eye protection.
Relieve pressure on hydraulic system before repairing or adjusting.
•

STORAGE SAFETY

Store the unit in an area away from human activity.
•
Do not permit children to play on or around the stored machine.
•
Support the frame on stands and blocks to provide a secure base.
•

SAFETY SIGNS

The following illustration shows the approximate location and detail of safety signs.
•
Keep all safety signs clean and legible and replace any that are damaged or missing.
•
When original parts are replaced, any safety signs affixed to those parts should be replaced
•
as well. Replacement safety signs are available from your local dealer.
•
4