Panasonic DMR-EH67GN Service Manual page 20

DMR-EH67GN / DMR-EH67GC / DMR-EH67GCS
Mode name
RTSC Return in XP
(A & V)
I/P Switch
Audio Mute (XTMUTE)
Audio Mute (XDMUTE)
Audio Pattern Output
Item
Description
AV1 input signal is encoded (XP), decoded
(XP) and output decoded signal to external
without DISC recording and DISC playback.
Switch Interlace and Progressive in EE mode.
*Initial setting is "Interlace".
*This command is effective during executing
"White Picture Output", "Magenta Picture
Output" and "RTSC Return in XP (A & V)"
modes.
Check whether mute is applied normally by
the timer microprocessor.
Check whether mute is applied normally by
the Digital P.C.B..
The audio pattern stored in the internal
memory is output
(Lch: 1kHz/-18dB)
(Rch: 400Hz/-18dB)
*Audio sound clock switching operation of
DAC can be confirmed by sub command [2]
[4].
FL display
Initial mode: EE2/ Interlace/ XP/
Audio 48kHz
Switch Interlace/Progressive
Audio 44.1 kHz/ 48 kHz Switch
Initial mode is Interlace
Switch Interlace/Progressive
Initial mode (Audio 48kHz)
Audio 44.1kHz/48kHz switching
20
Key operation
(Remote controller key)
Press [1] [3] in service mode.
Press [1] [4] in RTSC Return XP
mode.
*I/P are switched alternately.
Press [2] [4] in RTSC Return XP
mode.
*48 kHz / 44.1 kHz are switched
alternately.
Press [1] [4] in I/P Switch mode.
*I/P are switched alternately.
Press [2] [1] in service mode.
Press [2] [2] in service mode.
Press [2] [3] in service mode.
Press [2] [4] in Audio Pattern Output
mode.
*48 kHz / 44.1 kHz are switched
alternately.