Audio Filter" Setting - Kenwood Sovereing DV-5700 Instruction Manual

Operation procedure
1.
Set the mode switch of the joystick remote to the
Purple position.
2.
While the player is in stop mode, press
the joystick up or down to display the "SOUND"
menu of "SET UP MENU".
3.
Press to open the setup screen.
ENTER
4.
In the setup menu, select "Dynamic Range Control"
by tilting the joystick up or down and press
Digital Audio 7
PCM Down Conversion Wide
7
Dolby Digital
7 Normal
DTS
7 Midnight
MPEG
Speaker Setting (Custom)
Speaker Setting (Quick)
Audio During Search
Dynamic Range Control
Audio Filter
5.
Select the level by tilting the joystick up or down, then
press to enter the selection in memory.
ENTER

"Audio Filter" Setting

DVD AUDIO is recorded with a maximum sampling rate
of 192 kHz and theoretically capable of reproducing up
to 96 kHz. As a result, the speakers used may be damaged
1 and tilt
if they are not compatible with high frequencies. When
SET UP
an ordinary speaker system is connected, set the "Audio
Filter" setting to "Filter 60 kHz" to protect the speakers.
When the speaker in use are compatible with high
frequencies, set this setting to "Filter 110 kHz". (For
details, refer to the instruction manuals provided with
your speakers.)
At the factory, the player has been set to "Filter 60 kHz"
to protect the speakers from damage.
.
ENTER
Setting items
" " : Select to return to the previous screen.
"Filter 60 kHz" : Select when the speakers in use are
not suitable for reproduction of high frequencies.
"Filter 110 kHz" : Select when the speakers in use
are suitable for reproduction of high frequencies.
Operation procedure
1.
Set the mode switch of the joystick remote to the
Purple position.
2.
While the player is in stop mode, press
the joystick up or down to display the "SOUND"
menu of "SET UP MENU".
3.
Press to open the setup screen.
ENTER
4.
In the setup menu, select "Audio Filter" by tilting
the joystick up or down and press
Digital Audio
PCM Down Conversion
Dolby Digital
DTS
MPEG
Speaker Setting (Custom)
Speaker Setting (Quick)
Audio During Search
Dynamic Range Control
Audio Filter
5.
Select "Filter 60 kHz" or "Filter 110 kHz" by tilting
the joystick up or down, then press
selection in memory.
1 and tilt
SET UP
.
ENTER
Chapter 6: Various Setups
7
Filter 60kHz
7
7 Filter 110kHz
to enter the
ENTER
61