Switching The Audio Language; Using Headphones - Kenwood Sovereing DV-5700 Instruction Manual

Switching the audio language

When a VCD or a DVD containing the recording of audio
in multiple languages is played, the language used in
the voice can be switched over. (The audio language can
also be switched by the OSD operation.
1.
Set the mode switch of the joystick remote to the
Purple position.
7
2.
Press during playback to display the "SOUND"
P.AUDIO
AUDIO
OSD. Each further press of the button switches the
1 Dolby
displayed
ENG 5.1ch
¶ With a DVD AUDIO disc, an audio language
number can be selected from up to 2 numbers.
¶ With a DVD VIDEO disc, an audio language
number can be selected from up to 8 numbers.
¶ With VCD, "STEREO", "L", "R" or "L+R" can be
selected.
¶ The default audio language set by the user is
selected when the power is turned on or the disc is
changed. If the default language is not contained
in the disc, the priority language defined for the
disc will be played back.
¶ The above operation is not available in stop mode.
It is also unavailable with ordinary music CD(CD-
R/RW)s.
28

Using Headphones

Connect stereo headphones (with a standard stereo
phone plug) into the PHONES jack and adjust the
volume level with the PHONES LEVEL knob. The player
incorporates the headphone Virtual Surround facility
)
allowing the use of surround audio through
headphones.
(Audio icon).
PHONES LEVEL
MIN MAX
SURROUND VIRTUAL 192kHzfs SAMPLING 96kHzfs
STANDBY
POWER
OPEN/CLOSE
D I S C S K I P PURE AUDIO MODE
DISC 1 DISC 2 DISC 3 DISC 4 DISC 5
ON OFF
PHONES LEVEL
M I N M A X
PHONES
Chapter 3: Basic Operation