Variable Illumination Color Setting; Contrast Adjustment; Dimmer - Kenwood KDC KDC-V6017 Instruction Manual

Cd receiver
Hide thumbs Also See for KDC KDC-V6017:
Table of Contents

Advertisement

Menu settings

Variable Illumination Color Setting

You can set the display to a desired color.
Display and setting:
1
Select the display "Color" during the selecting function in the
menu mode.
2
To set a color manually:
Hold down on the 4 or ¢ button.
Pressing the ¢ button advances the color, and pressing the
4 button reverses it.
When the desirable color appears, release the button.
3
To make the popular colors appear:
Press the preset button (#1-4) for the desired color.
The buttons #1-4 is preset for the following four colors:
#1: White
#2: Red
#3: Blue
#4: Blue Green
4
To switch colors depending on the situation:
(Situational Mode)
Each time you press the #6 button, the mode switches as
follows:
M
Scan Mode
M
SRC Mode
(Changing colors depending on the source being played)
M
Time Mode
(Color changes every six hours)
M
Situational Mode off
When Situational Mode is off, the original color setting
resumes.
5
To finely adjust blue: (Blue Adjust Mode)
Press the #3 button for at least two seconds to enter the
Function of the KDC-V6017
— 30 —
blue adjust mode.
The 4 and ¢ buttons are used to adjust the blue color
tones, respectively.
Press the #3 button to end the blue adjust mode.
6
To store the color setting in the memory:
(color preset memory)
After adjusting the illumination colors, press the #5 button for
two seconds to store the color setting in the memory.
Pressing the #5 button again recalls the stored colors from the
memory.
NOTE
The Blue Adjust mode setting cannot be stored in memory.
7
Press the MENU button to end the Variable Illumination Color
Setting mode.

Contrast Adjustment

This adjustment permits easy viewing of the display.
Display and setting:
"Contrast 0" – "Contrast 10"
NOTE
The initial setting value is "5".

Dimmer

You can dim the display.
NOTE
The dimmer function is not available for units if the dimmer wire
is not connected.
Display and setting:
"Dimmer ON" : The dimmer setting is on. (Default setting)
"Dimmer OFF" : The dimmer setting is off.

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Kdc-516sKdc-57mrKdc-x617

Table of Contents