High-Pass Filter Frequency For Front Output; High-Pass Filter Frequency For Rear Output; Low-Pass Filter Frequency For Non-Fading Output; Phase For Non-Fading Output - Kenwood KDC KDC-V6017 Instruction Manual

High-pass Filter Frequency for Front Output

Adjust the frequency of the High-pass filter for front output.
Display and setting:
"HPF F" : Through / 40Hz / 60Hz / 80Hz / 100Hz / 120Hz /
150Hz / 180Hz / 220Hz
NOTE
You can separately set the high-pass filter for front and rear
output, including preouts. The high-pass filter does not affect the
non-fading preout.

High-pass Filter Frequency for Rear Output

Adjust the frequency of the High-pass filter for rear output.
Display and setting:
"HPF R" : Through / 40Hz / 60Hz / 80Hz / 100Hz / 120Hz /
150Hz / 180Hz / 220Hz
NOTE
You can separately set the high-pass filter for front and rear
output, including preouts. The high-pass filter does not affect the
non-fading preout.

Low-pass Filter Frequency for Non-Fading Output

Adjust the frequency of the Low-pass filter for Non-Fading
output.
Display and setting:
"LPF NF" : 50 Hz / 80 Hz / 120 Hz / Through
Function of the KDC-X617
Function of the KDC-X617
Function of the KDC-X617
— 15 —

Phase for Non-Fading Output

Adjust the phase for Non-Fading output.
Display and setting:
"NF Phase" : Normal (0°) / Reverse (180°)

Volume Offset

Set the sound level of the each source selected by adjusting
the level difference between the basic sound level and the
required level.
Display and setting:
"V Offset"/"VOL Offset" : - 8 – ± 0
Function of the KDC-X617