Peavey PVs 12 Sub Operating Manual page 22

Electronic Crossover
Linkwitz-Riley crossover variable from 90 Hz to 180 Hz.
Low Pass slope:
24 dB/octave
High Pass Output slope:
24 dB/octave
Infrasonic Filter Slope:
36 dB/octave
Nominal Amplifier Frequency Response:
+0, -3 dB from 20 Hz to 20 kHz
Hum and Noise:
Greater than 90 dB below rated power
THD and IM:
Typically less than 0.1 %
Power requirements of PeaveyPVs12 Sub System:
Nominal 160 Watts, 100-120 VAC 50-60 Hz (Domestic)
220-240 VAC 50-60 Hz (Export)
Enclosure Materials & Finish:
Black acrylic painted enclosure with 15 mm MDF, with a full-length, black powder coated perforated
steel grille. Eight rubber feet for floor use on the bottom and for on the left side.
Dimensions (H x W x D)
21.82 in. x 14.38 in. x 20.13 in.
554 mm x 365 mm x 511 mm
Net Weight:
57 Lbs. (25.9 kg)
Mounting Provisions:
Two 1 3/8" pole mounts with M20 threaded pole for stand mounting a suitable speaker on top of the Sub,
and four large rubber feet on bottom and on the side for floor use. Threaded pole is supplied with the
unit.