Demonstration Mode; Displaying Cooktop Data - Miele KM 7200 FR Operating And Installation Instructions

Demonstration mode

This function enables the cooktop to be
demonstrated in showrooms without
heating up.
Activating/Deactivating the
demonstration mode
 Switch the cooktop on.
 Touch and hold the 0 and 2 sensor
controls on the numerical keybank at
the same time for 6 seconds.
In the timer display,  flashes
alternately with  (demonstration mode
activated) or  (demonstration mode
deactivated) for a few seconds.
Additional functions

Displaying cooktop data

The model designation and software
version can be displayed. There must
not be any pots or pans on the
cooktop.
Model number/Serial number
 Switch the cooktop on.
 Touch and hold the 0 and 4 sensor
controls on the numerical keybank at
the same time for 6 seconds.
Numbers appear in the timer display
separated by a dash.
Example:   (Model number
KM 1234) –      (Serial
number)
Software version
 Switch the cooktop on.
 Touch and hold the 0 and 3 sensor
controls on the numerical keybank at
the same time for 6 seconds.
Numbers will flash on and off in the
timer display:
Example:  flashing alternately with  =
Software version 123.
43