Playing Back A Tape - JVC CA-FS400 Instructions Manual

To select a track
Increases the track numbers.
Decreases the track numbers.
To select a group (MP3 only)
Before starting playback...
GROUP UP
Increases the group numbers.
GROUP DOWN
Decreases the group numbers.
Group number and group name appear.
To locate a particular portion
While playing a disc, press and hold until the portion you
want is reached.
PRESET UP
Fast-forwards the track.
PRESET DOWN
Fast-reverses the track.
To locate a track directly and start play
Examples:
To select track number 5, press
1 2 3
5.
4 5 6
To select track number 15, press
+10, then 5.
8 9
7
To select track number 30, press
+10, +10, then 10.
10 10

Playing Back a Tape

To insert a tape
You can play back tapes of types I, II, and IV.
Remote
ONLY
To start:
To rewind tape:
Before or after play...
To change the tape running direction
To reverse the tape automatically
Push Insert
With the tape side facing outside
Rewind the tape to the right.
Rewind the tape to the left.
3 (forward play)
2 (reverse play)
REV.
MODE
Tape is played from the forward side to the
reverse side. When the reverse side is played
back, playback stops.
Tape is automatically reversed, and playback
repeats until you stop it.
Tape will not be reversed. When the current
side of the tape reaches its end, playback stops.
Close
To stop:
11